Falcon Air Data Adapters

P/N: CSA50520-4

Use: Perform Pitot/Static Checks on Falcon Series Aircraft.

Landing Gear Proximity Switch Tester

P/N: F900PST-3200

GSE: F218362001 or FGFB93025

Use: Test the functionality of landing gear proximity switches on Falcon series aircraft.

Axle Nut Socket

P/N: FS2000.8

Use: Removing nose and main axle nuts for wheel removal/installation.

Axle Nut Socket

P/N: FS2000.6

Use: Removing nose and main axle nuts for wheel removal/installation.

Falcon Jack Pads

P/N: TF50B07104

Use: Used for jacking Dassault Falcon series aircraft.

Falcon Ground/Flight Simulator Test Box

P/N: F2000-3260-27

GSE: F2MA932601A1 / TO-32-436

Use: Permits ground/ flight simulation of individual landing gear proximity sensors on Falcon 900 and 2000 series aircraft.

Spring Loaded Fairing Tool

P/N: FLSF

GSE: TF50B55301A

Use: Used to remove and install the horizontal stabilizer spring fairing on Falcon series aircraft.

Engine Conditioning Trend Monitor Kit

P/N: 831702-19

Use: Used for downloading engine DEEC’s

Jack Pads

Main Pad P/N: 0025-0006116-9

Tail Pad P/N: 0025-0006108

Use – Used to wing jack Hawker Series aircraft.

Wrench, Wheel Retaining Nut

P/N: 25Y725A

Use: Used for removal and installation of Hawker MLG wheels.

Wrench, Maxaret Retaining Nut

P/N: 25Y257A

Use: Used for removal and installation of Hawker MLG Maxarets.

Challenger (All Models) Jack Pads

GSE: 07-10-01

P/N: (x3) – G600-070001-1

Use: Used to wing jack Challenger series aircraft.

Global (All Models) Jack Pads

GSE: 07X-10-01

P/N: (x3) – G700-071001-1

Use: Used to wing jack Global series aircraft.

Global Special Wrench

P/N: 57759A0000-01

Use: Used in disassembly of the nose landing gear assembly and replacement of NWS actuators on Global series aircraft.

Global Nose Wheel Steering Pin

P/N: 14-6867-6000

Use: Used for centering nose wheel steering system for rigging on Global series aircraft.

Challenger 300/350 Air Data Adapters

GSE: GSE 34C-10-02

P/N: (x2) Adapter CSA95264-4-4

P/N: (x1) Adapter CSA75700-4

Use: Perform pitot/static checks on Challenger 300/350 series aircraft.

Challenger 300/350 Standby Pitot Probe Leveling Fixture

GSE: 34C-11-03

P/N: G1003411003-001

Use: Perform leveling check of the standby pitot probe.

Lear Nose Gear Axle Jack Adapter

P/N: Z-2641

Use: This adapter is used to axle jack the nose gear on Lear model aircraft.

Lear Jack Pads

Main P/N: 2572006-8 (2ea pads p/n 2572006-3)

Nose P/N: 2370102-4

Use: Used to wing jack Lear model aircraft.

Global NWS NVM Interface Cable

P/N: G700-323203-1

GSE: GSE 32X-32-03

Use: Connects between the PMAT and NWS SCU to download the NWS SCU Non-Volitile Memory.

APU Hoist for Challenger 600 Series Aircraft

Kit P/N: G604-490001-77

Use: For removal and installation of APU on Challenger 600 series aircraft.

Challenger 300/350 Fishpole Hoist

Fishpole GSE P/N: 49C-00-01

Protective Sleeve GSE P/N: 49C-00-02

Fishpole P/N: PF51-033-1

Use: For removal and installation of APU on Challenger 300/350 series aircraft.

Bombardier Pitot Tube Leveling Adapter

P/N: G700-341101-7

Use: For checking angle on Global/Challenger pitot probes.

Global 5000/6000 Air Data Adapters

P/N: (4x) CSA95264-4-4

Use: Perform pitot/static tests on Global 5000/6000 series aircraft.

Bombardier Purging Hose Assemblies (2 Pin and 3 Pin)

P/N: (2ea ) 50017A42-6-0120

P/N: (2ea ) 50017A43-6-0120

Use: To purge the lines of the pitot-static system.

Bombardier Global 7500 MLG Axle Nut Socket

P/N: T46125

GSE Reference Number: 32X78K-11-10

Use: To remove and install the MLG axle nut on Global 7500 Aircraft.

Challenger 600 Series Air Data Adapters

GSE: 34−10−12

P/N: (x2) Adapter CSA60404-4-4

P/N: (x1) Adapter CSA75700-4

Use: Perform pitot/static checks on Challenger 600 series aircraft.

Global Series APU Fishing Pole Hoist

GSE: 20X-00-01

P/N:PF51-003

USE: Used for Removal and Installation of Global series APU’s.

Global Series APU Lifting Fixture

GSE: 49X-10-01

P/N: 5838212-1

USE: Used for Removal and Installation of Global series APU’s.

DIGITAL IMPEDANCE METER

GSE: 36−23−01

P/N: 252

Use: Used for measuring conductance to verify health of bleed loops

LCR METER

GSE: 36X−12−0

P/N: 880

Use: Used to check the impedance of a bleed loop to determine health of the loop

CONNECTOR REPAIR TOOL KIT

GSE: 36C−21−02

P/N: TZ−6368

Use: To repair Bleed Loop sensing element connector

BLEED LOOP CONNECTOR PIN CLEANING TOOL SET

GSE: 36C−21−03

P/N: TL35491

Use: To clean the contact pin in the bleed loop connector

Variable Stator Vane Adaptor

P/N: 8600429

Use: Used to move the VSV Mechanism on Global Series Aircraft

Global VFG Service Adapter

P/N: 03A3LAS2A-DP-A

Use: Used for servicing VFG oil system on Global series aircraft

Bombardier Hydraulic Service Unit

Fluid: HyJet IV-A

Container P/N: 06-5022-6600

Fitting P/N: KHC-1011

Use: Used for Servicing Hydraulic Systems on Challenger and Global Series Aircraft

Citation CE750 Interface Cable

P/N: 9555024-1

Use: Used for engine trend data downloading and AHRS configuration programming on the CE750 series aircraft.

CE560 Jack Pads

P/N: Numerous

Use: Used to wing jack CE560 series aircraft

CE560 Free-Play Kit

Use: Used for checking flight control free-play.

CE560XLS Pratt & Whitney Engine Monitoring Test Set

P/N: PWC67398

Use: Used to comply with engine trend monitoring downloads

CE560 Brake Bleed Kit

Use: Used for bleeding brake systems on CE560 series aircraft

CE560 Main Entrance Door Rigging / Adjustment Kit

Use: Used for adjusting and rigging the main entrance door on CE560

CE680 / CE750 Jack Pads

Kit P/N: K-2799

Nose Pad P/N: R-1808

Main Pad P/N: R-1807

Use: Used to wing jack CE680 and CE750 series aircraft.

CE750 Main Gear Axle Jack Adapter

P/N K-2730 (02-7833-0110)

Use: Used to single point jack the main landing gear on the CE750 series aircraft.

Nose Gear Axle Jack Adapter

P/N K-2728

Use: Used to single point jack the nose landing gear on the CE680, CE680A, and CE750 series aircraft.

Citation CE680(A) DPHM Engine Download Kit

P/N: PWC40521

Contains Cables: PWC63051 (AC Interface), PWC62174 (RS422 to Computer), PWC89892 (Dual Channel RS422 To USB)

Use: DPHM Cables for PW306C and PW306D Engines

Citation CE700 Jack Pads

Nose Pad P/N: R-1808

Main Pad P/N: R-3053

Use: Used to wing jack CE700 series aircraft.

Citation CE680(A) and CE700 NLG Actuator Place Holder

P/N: ALSE00149338

Use: Used as a place holder for the NLG actuator on CE680(A) and CE700 series aircraft.

CE-680A Nose and Main Gear Simulator Test Boxes

Nose Box P/N: 6988012-7

2ea Main Box P/N: 6988012-10

Use: For simulating an in air or on ground situation for the Cessna Latitude.

CE-700 Nose and Main Gear Simulator Test Box

Nose Box P/N: 6988012-7

Main Box P/N: 8288001-1

Use: For simulating an in air or on ground situation for the Cessna Longitude

Pratt and Whitney Shank Nut Tool

P/N: PWC31771-100

Use: Used for installing Shank Nut’s on Pratt and Whitney Engines

CE680-CE700 Hydraulic Service Unit

Fluid: MIL-PRF-87257

Container P/N: 06-5022-6800

Use: Used for servicing hydraulic systems on CE680, CE680A, and CE700 aircraft

Fluke RTD Calibrator

Model: 712B

Use: Used for performing Precooler Actuator and Temp Sensor operational checks on CE680 and CE680A series aircraft

Phenom 300 Accessory Gearbox Seal Puller Kit

Consists of P/N’s: PWC67510-02, PWC66810, PWC67711, PWC67581, PWC44211-02, PWC66801, PWC30114-16, PWC67511, PWC67620, PWC67723, PWC66103, PWC67724, PWC66625, PWC30499-51, PWC67548

USE: Used for removal and installation of Pratt and Whitney 535E Accessory Gearbox Carbon Seals and Accessory Gearbox Rear Cover.

Phenom 300 Jack Pads

Kit P/N: AGE-04890-401

Main P/N: AGE-04944-001

Nose P/N: AGE-04511-401

Use: Used to wing jack the Phenom 300 series aircraft.

Phenom 300 Air Data Adapters

GSE: 011

P/N: (x2) CSAP300HTR4-4-4-4

P/N: (x1) CSA50054-4

Use: Perform pitot/static/AOA checks on Phenom 300 aircraft.

Phenom Hydraulic Servicing Unit

Fluid: MIL-PRF-87257

Container P/N: 06-5022-6800

Fitting P/N: KHC-4017

Use: Servicing the hydraulic reservoir on Phenom 300 series aircraft.

Fixture – Rigging and Maintenance Interface, Flight Control System

P/N: 462900GSE-1003

GSE P/N: GSE 062

Use: Performing flight control rigging on Phenom 300 aircraft.

Phenom 300 Pin, Rigging Kit

P/N: 462900GSE-1003

GSE P/N: GSE 062

Use: Performing flight control rigging on Phenom 300 aircraft.

Phenom DC Pump Cartridge Removal Tool

P/N: 500T05780

GSE P/N: GSE 040

Use: This tool is used to remove and install the fuel pump cartridge on Phenom model aircraft.

Phenom 100/300 Engine Download Kit

P/N: PWC69806

Contains Cables: PWC69810 (Download Adapter), PWC40712 (DCU Adapter), PWC62174 (Cable Extension), PWC73009 (Dual Channel RS422 To USB)

Use: DPHM Cables for PW535E and PW617F

Phenom 100/300 – AC Recovery, Recycle, Recharge – Unit

P/N: 34788

GSE P/N: GSE 050

Use: This Unit gives the ability to recharge the VCS.

Phenom 300 Pressurization CPU Adapter Kit

P/N: K-4281

GSE P/N: GSE 017

Use: Used to connect a pressurization test cart to Phenom 300 Aircraft for pressurization checks

28 Volt DC Power Cart

Model: UDC-28M

P/N: 198-12000-11

Use: Supply 28 volts and up to 600 amps DC power to aircraft.

115 Volt AC Power Cart

Model: JTP4

P/N: 3744904-WHTR1

Use: Supply 115 volts and up tp 90 KVA AC Power to aircraft.

Video Borescope

P/N: V3 040 3000 4

GSE: Numerous

Use: Numerous

Includes: Hawkeye® V3 HD Video Borescopes simply deliver the best image quality of any borescope on the market today! 4-way articulation, HD daylight readable color touchscreen display, integrated adjustable LED illumination and WI-FI Connection. The V3 Deluxe Kit also includes the 90 degree tip, Close Focus Tip, Neck Strap, Tripod and extra battery.

3 Channel Pitot Static Test Set

P/N: DPST-9300A

Use: The Model DPST-9300A Automated RVSM / AOA-3 Channel Pitot Static Test Set is a fully automated flightline three (3) channel pressure controller, designed to provide regulated total (PT) pressure and static (PS) pressure outputs to simulate Altitude, Airspeed, and Vertical Speed parameters as well as AOA, Angle of Attack / 3 Channel Smart probe testing.

DART (DATA ACQUISITION RUGGEDIZED TOOL)

GSE: 31X−31−08

P/N: KGB750−001

Use: Used to download the CVR or FDR data.

Aircraft Hydraulic Mules (Phosphate Ester)

P/N: Numerous

Use: Used for Applying Hydraulic Power to CE560XL, Challenger Series, Global Series, and Gulfstream Series aircraft

Aircraft Hydraulic Mule (MIL-PRF-87257)

P/N: Numerous

Use: Set up for applying external hydraulic power on Phenom 300, CE680/CE680A, and CE700 aircrafts.

Robo-Mule 5000 Ground Hydraulic Power Stand

P/N: 13-6603-6000

Use: Utilizes your aircraft hydraulic pump, filters, pressure regulator, and fluid to supply hydraulic system pressure to aircraft.

Permaswage Kit

P/N: DLTFRPSKT3001

Use: Contains -4,-6,-8,-10 and -12 heads. The Permaswage system is a tube connecting system that mechanically attaches a Permaswage fitting to a tube by radial swaging. The system is used to make permanent and separable connections between metal tubes. It works by deforming the metal fitting onto a tube radially, 360° around the circumference, using the Permaswage Lightweight Tool (DLT).
Compatibility : This tool is used on most aircraft makes and models. Common in hydraulic, pneumatic and fuel system tubing.

Avionics TDR

P/N: 6021-5154

USE: The Avionics TDR is used for locating faults in wire runs.

Glenair Band-It Banding Tool

P/N: 600-058

Use: Used for banding wire shields to connector with metal bands

Aircraft 30 Ton Wing Jacks

Model: 02A1248-0112

Use: Used to wing jack aircraft

Aircraft 30 Ton Wing Jacks

Model: 02A7844-0111

Use: Used to wing jack aircraft

Aircraft 12 Ton Wing Jacks

Model: 02-1240-0111

Use: Used to wing jack aircraft

Aircraft 10 Ton Wing Jacks

Model: 02A7815C0110

Use: Used to wing jack aircraft

Aircraft 5 Ton Wing Jacks

Model: 02-7828C0110

Use: Used to wing jack aircraft

Aircraft Tail Stand (Small)

Model: 03-5826-0000

Use: Used to provide proper support while aircraft is on jacks

Aircraft Tail Stand

Model: 03A5822C0000

Use: Used to provide proper support while aircraft is on jacks

Aircraft 12 Ton Axle Jack

Model: 02-7813C0100

Use: Used to axle jack aircraft

Aircraft 25 Ton Axle Jack

Model: 02-7835C0100

Use: Used to axle jack aircraft

Aircraft 12 Ton Axle Jack (Low Profile)

Model: 02-7863C0100

Use: Used to axle jack aircraft